1039 Duratec Clear Hi-Gloss Gel Coat Additive

1039 Duratec Clear Hi-Gloss Gel Coat Additive


big beam hi I’m Chris from Fibre Glast today we’re going to show you the
Duratec Clear Hi-Gloss Additive that we carry on Fibre Glast dot com Duratec Hi-Gloss Additive is blended
with gel coats to improve gloss level lower viscosity and enhance the gel coat
properties it allows gel coat to cure open-air so
it’s our recommendation to use this for any gel coat repair that will have air contact although most gel coats can be sprayed
straight out of the can most people choose to thin them this addiitive thins gel coats enough to help you spray resulting in a high gloss pinhole free
class A surface it’s typically used for repairs and out of mold applications but it can also be added to gel coat for
in mold applications to enhance the gloss level Duratec Clear Hi-Gloss Additive should
be measured out and blended with a one to one ratio when used with regular gel coats you
will notice the lower viscosity in the mix when using with tooling gel coat you should use a fifteen-percent ratio tooling gel coat benefits include
improved gloss level reduced surface porosity open-air cure
and improved durability after blending you should catalyze your gel coat with two percent MEKP when mixed you’re ready to spray this additive improves gel coat performance for repairs but for below the waterline repairs we still
recommend adding our number 71 styrene wax for maximum cured hardness thanks for watching Fibre Glast on
YouTube remember to check out our Duratec Clear Hi-
Gloss Additive and all of our other gel coats on Fibre Glast dot com and don’t forget to subscribe to our
channel and like this video

5 Replies to “1039 Duratec Clear Hi-Gloss Gel Coat Additive”

Leave a Reply

Your email address will not be published. Required fields are marked *