[Eng sub] DIY Sleeveless dress (3.Sewing) / 원피스 만들기 (3.봉제하기)

[Eng sub] DIY Sleeveless dress (3.Sewing) / 원피스 만들기 (3.봉제하기)


I’ll sew darts Pinch the dart so that the edges line up. Lay it like this and start to sew Now I’ll connect the shoulder parts first. Puts the right sides face to face with each other I’ll sew up the side lines. Fold your seam allowance toward your shoulders. Then surge down the shoulder-lines and side-lines. I’ll join the edges of bias binding You have to make an open seam Let’s start with the neck-line Fold the seam allowances to the back. Turn your clothes over. Now let’s make bias binding on the neck-line. Sew with the right side of fabric facing down. Give a space at least one size of presser foots. Pull the fabric slightly and stitch it up. I’ll try to connect both ends of bias binding smoothly. This one is short and it’s getting longer, right? On the other hand, it’s long first and shorter, right? That way, when the two ends meet each other later on, they are parallel. It’s parallel to each other, right? Make each other’s slopes the same, and then seal them. The texture of the fabric matches with each other, right? You have to put it like this and connect it. Trim off the unnecessary cloth (leave 0.7cm) After making an open seam let’s sew it again. When the connection works like this, Your clothes gonna be more pretty. Cover the raw edges.. from where we started. Fold it twice.. I’ll also sew bias binding on the arm hole Also, Give a space at least one size of presser foots. Pull the fabric a little bit please. after overlapping the fabric with each other
Cut the two fabrics in the same direction. Cut them parallel to each other and give them some space. I’m going to put the ends together like this. It’s the same way that we used to connect the bias binding. I’ll stitch up between this and this point. From here to here. Trim off these edges, leaving only 0.7 cm. Then, make an open seam and seal them. Half-fold… Fold it a bit wide to cover the first sealed line. A 3.5cm seam allowance was made in advance at the hem. First, fold and iron 1.5cm. Fold 2cm and iron it. Sew along the crease Completed 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *