Powder Coat Gun (SETTING UP) SpectraCoat ES02-P System | PBTP

Powder Coat Gun (SETTING UP) SpectraCoat ES02-P System | PBTP


Hello, my name is Paul. I’d like to thank
you for purchasing a SectraCoat ES02 powder coating system from powderbuythepound.com.
Now I’d like to take a few minutes to show you how to set up your system to begin powder
coating. First off, I always like to take our manual here, and take a look at the checklist
that’s usually on page 2 or 3, depending on what unit you have. Uh, well first off, we
have the ES02 control box,we have a cuff spray gun, we have a clear pressure hopper, uh,
we have our 12ft grounded powder hose, 5ft of clear tubing, 15ft black tubing, a ground
wire, uh, our AC power cord, our gun, our 6in electrode extension and also our extra
conicals and our flat spray nozzles. So now all our connections on the ES02 are on the
back of the unit so i’m gonna bring it down here and we’ll come in here and look at what
we’ve got. First off, go ahead and put our main air in here. And you can come straight
in with a 3/8th’s tubing, or we allow a female connector on the other end of our tubing or
adapter, in case you want to go with a uh, male quick connector or just some standard
air compressor lines. Uh, next, we will go with our gun cable, a little connector, it’s
got a little notch in it, and we’ll go right down in here in the lock, secure it and do
a little twist, and there we go. Next off, we’ll grab our ground wire here, and this
ground wire , this particular ground wire is the one that goes back to your ground rod.
We give you one to hook your controller up, but uh, when you’re powder coating you need
a ground wire going to your part from the ground rod and you need a ground wire going
from your controller to your ground rod, and this is your controller to ground rod. Got
the ground in there, and now we’ll go ahead and grab our power cable here. It’s just like
a standard computer or cable for your TV. Goes in like so. And you have a 110 to 220
switch here, so if you’re hooking it up to 110 and 220 you need to make sure that you
choose your proper voltage so you don’t harm your unit. Next, we will take and put our
5ft clear powder hose, our tubing, 1/4in tubing, our feed air quick-connect. And then, we’re
going to take our black 15ft uh, which is gonna be our rinser hose, now we’re gonna
put it into the auxiliary here. Alright that’s all our connections on the back, so we’re
gonna come back out and, uh, we’re gonna go ahead and hook up our hopper to our gun and
our uh, tubings that we had. Alright. First off, we will go ahead and place our 5ft piece
of clear tubing into our hopper here. Now I’m gonna go ahead and kind of bring the gun
over here and I’ll just set it on the top for right now, on top of our controller. And
we will take our 15ft, uh, rinse air, and we’ll put it right down here in this little
bar right here, push it a lot farther up there. And we got one last connection. We need to
be able to take and connect our grinding powder hose so there’s a little bar here on our hopper.
Alright. There we go. And connect that down here at the other end to our black bar on
our gun. So we now have powder hose connected to the hopper, compressor hopper. And we have
it on the end of our gun. Now we’ve got all our connections made. We can get your spraying.
Uh, once again, thank you for your purchase, and enjoy your new SpectraCoat system from
powderbuythepound.com.

Leave a Reply

Your email address will not be published. Required fields are marked *