“Precision Applying” The Last Coat™ with a Sponge to Avoid Over Spraying

“Precision Applying” The Last Coat™ with a Sponge to Avoid Over Spraying


– So I wanted to show you guys today, if you’re ever worried about over-spraying anything with the last coat,
I just ceramic-coated this Shelby GT350 and the coating
still has not cured, so, when it comes to cleaning
the windows you either should clean them before doing
the coating, or, like I did not this time, gotta be careful now with cleaning the windows, we
don’t want anything coming down on the coating because
that could affect the ceramic. So, I’m going to use the last
coat, which at the end of day, wouldn’t affect this, but, still, take caution when you’re doing anything. But I wanted to show you
guys an easy way to do this. I have a foam applicator pad here. Most of them come cut, this
one did not, so I cut this one. And, I like to put them right on to here. And the reason that they’re
cut like this, is so that the microfiber or the suede pad
here doesn’t just come off when you’re wiping it,
basically, so, I like to use a plastic razor blade, which if
you guys are doing any type of decal removal, these are great. Don’t use a actual razor blade unless you really, really know what you’re doing. So, then you just stick
this thing in here. If I can actually get it down in there. So it’ll look just like that. And, simply, if you have a
bigger bottle, you can just simply spray it right on to
here, it’s really no different. So, just gonna pump it right
on to the actual applicator. Get it nice and saturated. Once you get it saturated
like this you probably don’t have to respray it for a
few different times, until it gets pretty dry, so
you’ll be able to do a few different application here. So once you got it on
there, just simply hashtag the panel or the window that you’re doing. This will ensure proper
coverage as well as a level, the coating technology
that is in this product. You can do one pass of
hashtagging, or you can do two. It’s all up to you. And also I just wanted to show
you all, you can actually see the coating technology that is in here. That is it flashing, and it
has bonded now to the surface. So now that you got it on there like that, you’re just gonna simply
wipe it right back off. And it’s as simple as that. Now I don’t have to worry
about any type of over-spray or anything getting down on
whatever surface you didn’t want to get it on. So, again, foam applicator
pads for applying ceramic, and then, a suede applicator
wrapped around here into the slits that you
cut with a razor blade. So, thanks for all watching. Have a great day.

7 Replies to ““Precision Applying” The Last Coat™ with a Sponge to Avoid Over Spraying”

Leave a Reply

Your email address will not be published. Required fields are marked *